How to Hang Shelves on the Wall Without Tools and Screws
You might want to put up shelves but are afraid to do anything that could damage your walls. And even if you’re very skilled with a trowel, filling holes with screws and nails can often leave marks, which can potentially be a problem if you’re renting an apartment. The good news is that there are ways to place shelves on walls without risking a lot of damage. Here’s how to hang shelves without tools or screws.
Command strip approach
One solution is to use Command adhesive strips. These strips and hooks are temporarily attached to walls and can be easily removed without leaving a mark, which has attracted tenants for years. In fact, Command makes little picture ledges , which are just shelves that you hang on the wall with adhesive strips. You can also buy their large picture hanging tapes and use them on the back of your floating shelves.
The disadvantage is strength and stability. Picture ledges can only support up to five pounds, which isn’t that much. Large bars can support up to 16 pounds, but you will need to install them in a corner to get enough support. If you only place strips on the back of a shelf they will droop over time, but if you use a corner to get strips on both sides of your shelves you can use just about any floating shelf for storage up to 16 pounds. of things.
Another way to use Command’s shelving products is to buy their strong all-purpose hooks (which hold up to 15 pounds) and then buy shelving that’s designed to be used with hooks . (Just make sure the support brackets fit your hooks.) This may take some research, but the result looks nice and doesn’t depend on angles for stability.
If you don’t mind minor wall damage
If you’re not ready to rely on adhesive tapes, or are more concerned with avoiding using tools than damaging your walls, another way to place shelves on your walls is High & Mighty Shelves . These shelves use a combination of adhesive tape and press-fit brackets to support weights up to 25 pounds. All you need to do is place the strip on the wall where you want the shelf to be (ideally with a level), press the staples into the drywall with your thumbs, then slide the shelf over the brackets and press in the adhesive.
This will cause some minor damage to your walls that you will have to deal with when you move in, but it’s a very small mark that shouldn’t be difficult to repair with some putty or joint sealer (or, you know, toothpaste ).
Both of these methods will give you storage space without taking up floor space and requiring no tools, nails, screws, or experience. While I wouldn’t check the weight limits on these shelves (for example, trying to put 50 books on one of these shelves will likely end in tears), they will definitely put some things on your walls without making you lose sleep. your pledge.