Seven Electronics Board Functions You Need to Know

There are a large number of different boards for electronics on the market today, but almost all of them have a similar set of basic functions. Make Magazine describes seven of those features that almost any master should become familiar with.

Whether you’re talking about a Linux-enabled board like the Raspberry Pi or something simpler like the Arduino, they all have a few things in common. Make Magazine highlights seven different phrases and whiteboard sections you’ll want to know:

  1. Computing : Familiarize yourself with the main chip or processor on your board. They are all quite different, but you can tell how to recognize one by looking at a few.
  2. Indication : Know your flashing LEDs and what they are doing.
  3. Reset : Most boards have a reset button that will help bring your board back to life if you ruin it.
  4. Power : Your board is receiving power and can send power to other devices, so find out your voltage and how things work.
  5. Interoperability: This usually refers to I / O (I / O). Depending on the board, you often have pins that allow you to connect your device to other devices.
  6. Communication : This refers to communication functions such as Bluetooth, USB, or Wi-Fi.
  7. Mounting : Most boards have mounting holes, so you can screw the board into the case. Know where they are and how they work.

It’s all pretty simple, but once you understand these basics, you will have a much better understanding of the board as a whole. Go to Make for a complete description of each term.

Check Out These 7 Dev Board Features | Do


Leave a Reply