Never Vacuum These Common Household Clutter
There are so many smart ways to use a vacuum cleaner besides just wiping the carpet, but there are also some things you really shouldn’t be sucking up. You can avoid damaging your expensive car by learning what you can’t vacuum. Here are the things you should always avoid vacuuming:
Cup
Element Electronics , a manufacturer of vacuum cleaners, recommends never vacuuming glass. Sharp parts can damage internal parts, especially if your machine has bags or hoses. If you’re worried about the occasional broken glass shards hurting you , try some advanced sweeping hacks like this one to make sure you clean everything up.
A large amount of hair
A little hair in your vacuum cleaner is normal and probably unavoidable, but there’s a reason you see stylists sweeping after shifts: Too much hair isn’t good for vacuuming. According to the item, long hair can get tangled around your brush and lead to clogs, so you should get rid of most of it with a broom before using the machine for the final stretch.
sticky things
If you have a lot of dust in your vacuum cleaner, you might think it’s safe to suck up sticky debris if the dust covers it when it’s inside. According to Element, don’t risk it. Anything sticky can stain the hose, the inside, or the brush, causing clogging and even mold.
Any really fine dust
Superfine particles such as construction dust, fireplace ash, dirt from a broken makeup palette, or even coffee grounds can burn out the engine and be blown back into the air when you use the vacuum cleaner. They need to be swept too, Element says.
Soils
According to Reader’s Digest , you should also never vacuum the soil. This probably goes without saying, but nothing wet should ever get into a regular vacuum cleaner (not only because of the electronics, but also because of the possibility of mold and odors), but when you vacuum, in particular, the soil, you you also run the risk of pushing it deeper into your carpet, causing a stain.
Cords
Finally, don’t vacuum cords, Reader’s Digest says. It may not seem like a big deal, and it probably isn’t at first, but after repeated vacuuming, the outer part of the cord can break, exposing the wires inside. Yes, this applies to your vacuum cord as well – just bypass it.