What If You Wash Your Bathtub While Showering?
It seems that every step of washing the bathtub is as exhausting as possible. You have to kneel down to apply a proper scrub, which is physically uncomfortable at best and painful at worst. It’s impossible to clean the walls if you don’t intervene, a fact that I only remember after washing the bathtub. Rinsing should be the easy part, but it takes a long time – even with a handheld shower head.
The best way to avoid all of this is to wash your bathtub while showering. It’s faster and easier for a variety of reasons, including steam and hot water softening soap suds and other residues, so you don’t have to rub that hard and you can reach every inch of the wall because you’re standing straight. there .
Cleaning your bath items is easy: place shampoo and other items on one end of the bath, scrub the shelves, and then quickly rinse the bottles before replacing them. Speaking of rinsing, it’s a lot easier when you don’t have to worry about getting wet, especially if your shower head has a hand-held nozzle. (If it doesn’t, bring a large shatterproof cup with you and use it to rinse the walls.) The whole process takes about five minutes, so you’ll likely be doing this often enough to shower. and the bath is clean.
The soap and dish nozzle makes cleaning the shower even easier, but you don’t need it. Just grab a surface cleaner and a sponge or cloth and head out into town. Avoid using cleaners that can irritate the skin – I use the same diluted BioKleen as for everything else, with a microfiber towel. Most cleaners are no more slippery than shampoo or conditioner foam, but if bending over in a wet shower sounds too dangerous, quickly wipe down the edges of the tub before stepping into it. When you step out, your bathtub will be as fresh and sparkling clean as you are.