Add USB Hub With Case to Raspberry Pi Zero
The Raspberry Pi Zero only has one USB port, but you can always add more with a powered USB hub. At Circuitbeard, they demonstrate how to do it in fashion.
Basically, Circuitbeard hacks into a small USB hub ( LogiLink UA0160 or Belkin F5U404 work well for this) by adding a short USB cable and then a piece of wire. The manual uses parts of Frederick Vandenbosch’s manual , but simplifies it to avoid tricky soldering parts. From there, you will also need to laser cut some plastic sheets (as always, your local hacker space can always help you here ) and then screw it all together with a set of M3 nuts and bolts.
Raspberry Pi Zero USB Hub Mode with Case | Circuitbeard