The Best Way to Clean Your Laptop Keyboard
As you are probably well aware, your laptop keyboard is very dirty, even if you have cleaned it relatively recently. Crumbs, dust, dirt, stains and grease from your fingers accumulate surprisingly quickly and can turn into a layer of dirty film.
And while there are various products that will help you keep your laptop keyboard clean, like tiny vacuum cleaners that plug into a USB port, or gel that is also used to detail your car, you can thoroughly clean your keyboard using items that you have. you probably already have. arm. Here’s what to do.
How to clean a laptop keyboard
Okay, let’s get to work:
1. Turn it off
First of all, save everything you’ve been working on, turn off your laptop and unplug it. Don’t risk losing or messing with settings just to save yourself a minute or two.
2. Shake it
Take your laptop to the trash can or take what you use as a trash bag, turn the laptop over and gently shake it from side to side to get rid of crumbs, dirt or other debris. Tap the back of the laptop lightly to remove any parts that need extra encouragement.
3. Give him some air
There might still be dirt on your keyboard, so it’s time to blow it off. You can use a can of compressed air if you have one, holding it at a 75 degree angle . Otherwise, you can use a hair dryer on its “cool” setting, a portable air compressor, or close your lips and blow.
4. Wipe it
At this point, most, if not all, of the crumbs, dirt, and dust should be removed from the keyboard. Now it’s time to wipe it down to remove any dirt that has accumulated between or on the keys.
You can use a clean microfiber cloth dampened with a small amount of rubbing alcohol, or a bleach-free disinfectant wipe. In any case, make sure that the cloth or tissue is only damp and does not drip liquid.
If there is anything left on your keyboard after this, take some cotton swabs, soak them in rubbing alcohol, and use them to get between the keys or any other spot that needs special attention.
When you’re done, give the keyboard a few minutes to dry completely before plugging it back in and turning it back on.