Does Washing Take Away All the Nonsense?
Laundry cleaning is a method of removing soap buildup and any fabric softeners, body oils, or hard water minerals that build up in your clothes over time. While stripping your underwear is a long-standing method, it has again found its way into the spotlight due to some viral videos on social media . And while there are times when disassembling the laundry is necessary, it is not as effective as people think, and in many cases it can be avoided altogether.
First, the dark brown or gray color that the water turns into during the cleaning process is not grime or grime, as most people think, but rather because the hot water causes the fabric dyes to drain off . On top of that, the need for cleaning can often be avoided simply by using less detergent.
How to avoid having to undress your laundry
The main reason you need to wash your laundry is because the detergent builds up on your clothes. However, most of this buildup occurs primarily because we all use a lot more detergent than necessary.
For a regular laundry detergent, you will need a maximum of two tablespoons per large load . That’s all. For small to medium loads, we need even less. The full full cap that we were trained to dump in the washing machine is too much and actually works against getting our clothes completely clean. Even if the instructions say you need to use more, you don’t. Keep in mind that they want you to buy more.
Excessive foam interferes with proper washing of clothes
When you add too much laundry detergent, excess foam forms , which prevents the clothes from rubbing against each other, which is necessary in order to keep them as clean as possible. For high-performance washing machines that detect water and foam levels, this can trigger additional rinses that can add extra time and also waste extra water.
In addition to reducing the efficiency of your washing machine, too much foam also prevents dirt and grime from completely washing out of the machine, causing them to re-deposit on clothes and can create an unpleasant odor in your machine. If you notice a bad smell or plaque on your washing machine, one way to get rid of it is to add borax or washing soda to your regular cycle .
So, for starters, we all need to use less detergent so that our clothes can be properly cleaned.
When is it a good idea to wash your laundry?
If you have accumulated detergent build-up due to using too much, you can soak the laundry in a mixture of vinegar and water instead of removing the wash. To do this, mix one cup of vinegar for every quart of water and soak your clothes for an hour, then do your regular wash cycle.
In addition to detergent, too much fabric softener or hard water can also cause residues to build up on your clothes. In these cases, removing the laundry can be an effective method. It is best to limit the load of laundry to white, light and lightfast clothing, and separate the white from the colored so as not to accidentally dye the white.
To perform a wash cycle , add ½ cup borax and ½ cup washing soda, along with a little detergent, to a hot water bath. Soak your laundry in this mixture for four hours, then squeeze out the water and carry out your normal wash cycle.
Then, once you’ve removed all of that residue, you’ll want to use less detergent as you move forward so you don’t have to do it over and over again.